海拉尔—塔木察格盆地中部富油凹陷高含凝灰质碎屑岩储层成因及油气勘探意义     

蒙启安  李军辉  李跃  邹越 《吉林大学学报(地球科学版)》2020,50(2):569-578

海拉尔—塔木察格盆地中部富油凹陷下白垩统铜钵庙组和南屯组广泛发育高含凝灰质碎屑岩储层，并已于其中获得了工业突破，但对其成因机制认识不清。在岩心、薄片、录井和测井等资料综合研究的基础上，结合大量海拉尔—塔木察格盆地及周边地区的火山事件分析，认为中部富油凹陷发育的高含凝灰质碎屑岩的岩石类型主要包括凝灰质砂岩、凝灰质泥岩、凝灰岩和沉凝灰岩。不同时期、不同凹陷高含凝灰质碎屑岩储层发育特点各异，整体来看从铜钵庙组到南屯组储层中的凝灰质含量越来越低，高含凝灰质碎屑岩储层主要发育在铜钵庙组和南一段沉积时期。高含凝灰质碎屑岩储层中的火山物质并非来源于自身断陷期发生的基性火山活动，而是来自于大兴安岭地区大规模的酸性火山喷发事件。海拉尔—塔木察格盆地高含凝灰质碎屑岩储层的成因机制包括两种类型：一种是同沉积期火山灰直接空降入湖型；另一种是同沉积期火山灰先沉降至陆上经河流搬运后再沉积的水携型。高含凝灰质碎屑岩储层中的火山碎屑物质受有机酸作用易于溶蚀，次生孔隙发育，为深部油气成藏提供了有效储层空间，并且火山喷发活动对优质烃源岩的形成具有促进作用，对于油气勘探具有重要意义。  相似文献   

微生物勘探技术在潮汕坳陷油气勘探中的应用初探     

赵忠泉  孙鸣  万晓明  陈胜红  赵静  宋立军  李辉  强昆生  梁永兴 《中国地质》2020,47(3):645-654

东沙海域潮汕坳陷中生界研究程度相对较低,油气分布规律不明,为了加强对该区油气分布和富集规律的研究,针对潮汕坳陷西部地质目标首次应用微生物地球化学勘探技术(MGCE),探讨其含油气性。MGCE技术以轻烃微渗漏理论为基础,采用地质微生物学方法和地球化学方法检测研究区海底表层的微生物异常和吸附烃异常,预测研究区下伏地层中油气的富集区及其油气性质。检测结果显示研究区西部凹陷的斜坡区微生物异常呈块状发育,轻烃微渗漏强度变化大,可能为潜在油气富集区,酸解吸附烃成果显示可能的油气性质为干气和凝析油气。  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

近59 a锡林河流域潜在蒸散发及地表干湿状况变化趋势分析          下载免费PDF全文

张璐  朱仲元  张圣微  王慧敏  王飞  席小康 《干旱区地理》2020,43(4):997-1003

利用1960—2018年锡林河流域周边13个气象站的逐日气象资料,采用世界粮农组织（Food and Agriculture Organization of the United Nations,FAO）推荐的Penman-Monteith公式计算各气象站多年潜在蒸散发量及相对湿润度指数。通过利用主成分分析、相关分析和偏相关分析,探讨了锡林河流域潜在蒸散发、地表干湿状况多年变化规律;分析了影响潜在蒸散发的主要气象因子及各气象要素间的相互作用;着重讨论了锡林河流域潜在蒸散发的周期变化及其与相对湿润度指数、各气象要素的相互作用。结果表明：流域近59 a潜在蒸散发整体呈现增长趋势,且上升趋势显著,存在显著增加—减小交替的多尺度时频变化特征和多主周期变化规律;各气象要素中潜在蒸散发对温度的响应较大,平均风速次之;平均相对湿度受到潜在蒸散发的影响较大,降水次之。整个流域环境有不显著的变湿润趋势。  相似文献   

冀中坳陷中部现今热岩石圈厚度及地热学意义探讨     

崔悦  朱传庆  邱楠生  唐博宁  郭飒飒 《地质学报》2020,94(7):1960-1969

热岩石圈厚度是研究盆地的构造演化和板块动力学的重要参数,本文通过实测数据构建地壳分层模型,根据热传导的基本原理,计算了冀中坳陷中部的Moho面温度以及热岩石圈厚度,并探讨其地热学意义。结果表明:冀中坳陷中部的Moho面温度分布在500～600℃,西南侧整体温度较东北部高,热岩石圈厚度介于102～122km,其平面展布特征与华北克拉通热岩石圈厚度西厚东薄的特征相吻合,为华北克拉通受太平洋板块西向俯冲导致东部遭受破坏提供了依据,并且较薄的岩石圈使热流更易传导到地壳浅部,成为了该地区热异常的成因背景。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

东营凹陷史112区块沙三中亚段深水重力流体系精细刻画及在开发中的意义     

辛博  刘景彦  陈薪凯  马骁  仲昭 《现代地质》2020,34(2):321-332

深水重力流作为一种重要的、特殊类型的沉积体系,自发现以来就得到了学术界的广泛关注,并在油气勘探中日益受到重视。东营凹陷古近系沙三中段发育深水重力流体系,综合地震、岩心、测录井等资料,对郝家油田史112区块深水重力流体系的沉积类型、特征及在不同层序中的发育演化进行了精细刻画,总结了该区重力流沉积模式,为开发区储层预测提供重要参考。研究表明,本区深水重力流体系发育于三级层序的高位域,从下至上可划分出4个四级层序(SQQ^1-4),主要发育滑塌沉积、碎屑流沉积和浊流沉积3种成因类型,可识别出12种岩相组合。四级层序$\mathrm{SQQ}_{3}^{2}$时期重力流规模较小,$\mathrm{SQQ}_{3}^{3}$时期随着东营三角洲向湖盆中心推进,重力流规模扩大。滑塌沉积主要发育在三角洲前缘或前三角洲斜坡根部,在滑塌沉积前方形成碎屑流沉积,碎屑流向前搬运的过程中,逐渐转化成浊流沉积。三角洲前缘及前三角洲的浊流和碎屑流是开发井区进一步寻找储层的有利部位。  相似文献